MAINTENANCE 24.2 WHEN REQUIRED 24.2.1 CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING ! Never clean or replace the air cleaner element with the engine running. ! When using pressure air to clean the element wear safety glasses or goggles to protect the eyes. Checking If air cleaner clogging monitor (1) flashes, clean the air cleaner element. NOTICE Do not clean the air cleaner element until the air cleaner clogging monitor on the monitor panel flashes. If the element is cleaned frequently before the clogging monitor flashes, the air cleaner will not be able to display its performance fully, and the cleaning efficiency will also go down.
In addition, during the cleaning operation, more dirt stuck to the element will fall inside the inner element. Cleaning the Outer Element 1. Open the engine hood, loosen wing nut (2), and remove cover (3). 2. Remove wing nut (11), then take out outer element (1). To prevent dirt or dust from entering, use tape or a clean cloth to cover the air connector end of the air cleaner body. Clean the air cleaner housing (12) interior and the cover (5). 3-24