MAINTENANCE 24.2.3 CHECK AND TIGHTEN TRACK SHOE BOLTS If the machine is used with track shoe bolts (1) loose, they will break, so tighten any loose bolts immediately. Method for Tightening 1. First tighten to 200 ± 20 N C m (147.5 ± 15 lbf ft) then check that the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten a further 120 E ± 10 E (two flats). Order for Tightening Tighten the bolts in the order shown in the diagram on the right. After tightening, check that the nut and shoe are in close contact with the link mating surface. 3-31