Komatsu — 24.6.7 REPLACE IN LINE FUEL STRAINER

MAINTENANCE 24.6.7 REPLACE IN LINE FUEL STRAINER 1. Disconnect and plug fuel hoses (2). 2. Remove and discard the in-line fuel strainer (1). 3. Install the new fuel strainer and reverse the above process. REMARK Refer to arrow mark on the fuel strainer for correct fuel flow direction. Bleed the air in the fuel system using the procedure in:See 24.6.1 REPLACE FUEL FILTER CARTRIDGE AND FUEL-WATER SEPARATOR on page 3-55. 3-62