Komatsu — 30.6 SPECIFICATIONS

OPTIONS, ATTACHMENTS 30.4.2 WHEN USING GENERAL ATTACHMENT When the lock pin is set at the FREE position and the front or rear of the pedal is depressed, the attachment is actuated. Precautions when using ! Check that the stopper valve is in the ON position. ! Check that the selector valve is in the T position (to additional filter) for using the crusher. For details of the path followed by the oil; See 30.2.3 PATH OF OIL FLOW on page 5-12. ! For details of other precautions when handling the attachment, read and use correctly the instruction manual provided by the individual manufacturer. 30.5 LONG TERM STORAGE If the machine is not to be used for a long time, do as follows. !

Set the stop valve in the LOCK position. ! Install tube caps and o-rings to the valves. ! Set the selector valve to the T position (to tank). ! Set the lock pin on the attachment pedal at the LOCK position. If there is no breaker or general attachment installed, operating the pedal may cause overheating. 30.6 SPECIFICATIONS Max. oil flow when merged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 x2 R /min Relief set pressure of service valve safety valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 kg/cmІ (3980 psi) Cracking pressure of service valve safety valve . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 kg/cmІ (3560 psi) Low pressure safety valve relief set pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 kg/cmІ (2987 psi) Low pressure safety valve cracking pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 kg/cmІ (2205 psi) Other than these specifications, low pressure safety valve relief set pressure of 250 kg/cmІ (3560 psi) and low pressure safety valve cracking pressure of 205 kg/cmІ (2915 psi) are provided. Consult your distributor. 5-15