OPTIONS, ATTACHMENTS 5. Connect the attachment hoses to each tube. Turn the rotor of the stop valve connected to the inlet and outlet piping on the arm side face toward the free side. 6. After installing the attachment, check the oil level in the hydrau- lic tank. 30.4 OPERATION WARNING ! Be careful when operating the pedal in the deceleration range. The engine speed will rise suddenly. ! Do not put your foot on the pedal except when operating the pedal. If you rest your foot on the pedal during operations, and it is depressed by accident, the attachment may move suddenly and cause serious damage or injury. Operate the attachment as follows.
30.4.1 WHEN USING BREAKER Set the attachment pedal lock pin at the pedal forward stroke position (middle slot). Set the working mode to the B/O (breaker) position. Precautions when using ! Check that the stopper valve is in the ON position. ! Check that the selector valve is the position for using the breaker. For details of the path followed by the oil; See 30.2.3 PATH OF OIL FLOW on page 5-12. ! Consult with the individual attachment maker to decide whether it is necessary to install an accumulator for the attachment. ! For details of other precautions when handling the breaker, read and use correctly the instruction manual provided by the breaker manufacturer. !
When using the breaker, the hydraulic oil deteriorates more rapidly than for normal operations, so change the hydraulic oil and replace the additional filter element at a shorter interval. 5-14