OPERATION 11.1.2 METER DISPLAY PORTION PILOT DISPLAY When the starting switch is ON, the pilot display lights up when the display items are functioning. 1. Engine Preheat Monitor This monitor light indicates the preheat time required when starting the engine at an ambient temperature below 0 E C (32 E F). The monitor light illuminates when the starting switch is turned to HEAT position and flashes after 30 seconds to show that the preheat is done. The monitor lamp will go off after about 10 seconds. 2. Swing Lock Light This informs the operator that the swing lock is being actuated. When the swing lock switch is turned ON (actuated), the monitor light illuminates.
When the swing lock override switch is turned on, this monitor light flashes. REMARK A disc brake is installed in the swing motor to mechanically stop motor rotation. The brake is always applied while the swing lock is actuated. 2-9