OPERATION METERS 3. Engine Coolant Temperature Gauge This gauge indicates the engine coolant temperature. If the engine coolant temperature is normal during operation, the green range will illuminate. If the red range illuminates, the overheat prevention system will be actuated. The overheat prevention system acts as follows. When the red range (1) lights up: Engine coolant temperature monitor (3) flashes. When red range (2) lights up: Engine speed is lowered further to low idle, engine coolant temperature monitor (3) flashes, and alarm buzzer sounds at the same time. The overheat prevention system is actuated until the temperature enters the green range.
When red range (2) lights, if the engine coolant temperature is reduced and the fuel control dial is turned to the low idle position, the display will be canceled. 4. Fuel Gauge This gauge indicates the amount of fuel in the fuel tank. If the fuel level is normal during operation, the green range will illuminate. If only the red range illuminates during operation, there is less than 45 R (11.9 gal) of fuel remaining in the tank, so add fuel. Red range (1) ON: Fuel gauge monitor lamp (LED) (2) flashes. After the starting switch is turned ON, the correct level may not be displayed for a moment, but this does not indicate any abnormality.
When stopping the engine, turn the starting switch ON and check that all monitor lights and meters illuminate. 5. Display When the starting switch is ON, the time and service meter reading is displayed if the condition is normal. If the condition is abnormal, the content of the failure is displayed. When setting the time, the symbol flashes. 2-10