Komatsu — 11.1.3 SWITCHES

OPERATION 11.1.3 SWITCHES 1. Working Mode Selector Switch This switch is used to set the movement and power for the work equipment. By selecting the mode to match the working conditions, it is possible to carry out operations more easily. H/O (Heavy-Duty Operation Mode) light illuminates - This is used for heavy-duty work. G/O (General Operation Mode) light illuminates - This is used for ordinary work. F/O (Finishing Operation Mode) light illuminates - This is used for leveling or grading work. L/O (Lifting Operation Mode) light illuminates - This is used for fine control operations. B/O (Breaker Operation Mode) light illuminates - This is used for breaker operations.

When starting the engine, G/O mode is automatically selected. Each time the switch is pressed, the mode selection changes. NOTICE When using the breaker, do not set to the H/O mode. REMARK The H switch is used for changing the hour and the M switch is used for changing the minute when setting the time. For details; See 11.1.2 DISPLAY on page 2-10. 2-12