OPERATION 11.2.6 LIGHT SWITCH This switch is used to turn on the front lights, working lights, additional light at the top front of the cab, rear lights, and monitor lighting. 11.2.7 ALARM BUZZER STOP SWITCH This is used to stop the alarm buzzer if it sounds to warn of an abnormality during operation. 11.2.8 CAB HEATER FAN SWITCH This adjusts air-flow in 2 steps Hi: Strong air-flow. Lo: Weak air-flow 11.2.9 HORN SWITCH Press the switch on the right work equipment lever to sound the horn. 11.2.10 KNOB SWITCH The knob switch on the left work equipment lever is used to actuate the power max or swift slow down functions. Keep the switch pressed. The power max.
function can be used for a maximum of 8.5 seconds in H/O or G/O mode. The swift slow down function can be used for as long as the switch is kept pressed. 11.2.11 CAB LIGHT SWITCH This is used to turn on the cab light. ON: Lights up It is possible to turn on the cab light even when the starting switch is at the OFF position, so be careful not to forget to turn it off. 2-17