Doosan DL06 — Doosan DL06 User Manual

3.3.8. Gear train z Install a thrust washer over the camshaft and assemble the cam gear by aligning it with camshaft dowel pin. z Tighten the cam gear fixing bolts to the specified torque. Thrust washer z Assemble in order that camshaft Camshaft gear gear → step idle gear → high pressure pump idle gear → high pressure pump gear Idle gear z Install the idle gear by aligning the marks impressed on the Step idle gear (A) crankshaft gear and camshaft gear. z When install the step gear pin, align the oil port of step gear pin Step idle gear (B) toward lower side.

Camshaft gear Crankshaft gear Idle gear Air compressor gear or PTO gear High pressure pump driving gear Camshaft gear Idle gear Crank gear DL06 Diesel Engine Disassembly and Reassembly of Major Components 99 Camshaft thrust washer 1.0 +0.1 kg.m Camshaft gear fixing bolt 3.1 +0.5 kg.m Crankshaft gear and step idle gear (A) “0” and “0” Step idle gear (B) and Camshaft gear “1” and “1” Step idle gear 6.2 +0.5 kg.m High pressure idle gear 6.2 +0.5 kg.m