Doosan DL06 — Doosan DL06 User Manual

z Check the amount of backlash between gears using a feeler gauge. 3.3.9. Flywheel housing z Temporarily install the guide bar on Gasket the cylinder block. Fixing bolt z Apply gasket to the cylinder block. z Using the dowel pin and guide bar, install the flywheel housing and tighten the fixing bolts in a diagonal Oil seal sequence to specified torque. (Zigzag method) z When the bolts are tightened, remove the guide bar. z Apply lubricating oil to the outside of the oil seal and insert it to the flywheel housing using a press.

DL06 Diesel Engine Disassembly and Reassembly of Major Components 100 Measuring position Standard Cam shaft gear & idle gear 0.074 ~ 0.163 Fuel high pressure pump gear & idle gear 0.103 ~ 0.182 Crankshaft gear & oil pump driving gear 0.073 ~ 0.23 Air compressor (PTO) gear & cam gear 0.074 ~ 0.16 Measuring position Standard Cam shaft gear 0.280 ~ 0.430 Step idle gear 0.107 ~ 0.183 Fuel high pressure pump idle gear 0.078 ~ 0.140 Torque 11.2 +1.0 kg.m