Doosan DL06 — Doosan DL06 User Manual

z Install the piston ring in the piston z Identify the mark " Y " or " TOP " on using piston ring pliers. Top ring the ring end to prevent the top and 2nd ring bottom of the piston ring from being Oil ring interchanged and make the marked portion face upward. z Adjust the angle among individual piston ring gaps to 90 ° and fit a Oil ring 2nd ring piston assembling jig onto the piston, use care not to match the z Install the bearing by aligning it with ring gaps with the pin direction. the connecting rod key groove and Piston Piston apply oil to the bearing and piston. Top ring z Insert the piston by aligning the oil gallery port with the direction of the spray nozzle.

z Use care not to damage the cylinder liner and piston, and slightly lift and insert the piston into the cylinder so that the ring may not be damaged by the fillet of the liner. DL06 Diesel Engine Disassembly and Reassembly of Major Components 103