z Assemble the injector fixing bracket bolt with specified torque, and assemble the fuel high pressure connector fixing nut. 3.3.20. Rocker arm z Apply lubricating oil to the rocker arm bush and shaft, and assemble the intermediate bracket with the rocker arm (rocker arm assembly) on the cylinder head using fixing bolts. z In tightening the bolts, it must be done at the specified value using zigzag method. z Semi-install valve clearance adjusting bolts onto the rocker arm. z Install the rocker arm, bracket, rocker arm, washer, spring and snap ring in the described sequence. z Install the rocker arm and bracket in the same direction.
DL06 Diesel Engine Disassembly and Reassembly of Major Components 110 Torque Injector fixing bracket bolt 3.1+0.3 kg.m Fuel high pressure connector fixing nut 5+0.5 kg.m Injector harness fixing nut 0.15+0.01 kg.m Fuel over flow pipe fixing nut 0.8 ~ 0.9 kg.m Torque 3.7+0.5 kg.m