3.4. Fuel injection System 3.4.1. Common rail fuel-injection system z Pressure generation and fuel injection are completely decoupled from each other in the common rail injection system. The electric control unit(ECU) determine the fuel quantity, injection timing, and injection pressure in order to show the optimum performance on the condition for operation of the engine, then inject the fuel in the cylinder. Injector Cylinder head Common rail Fuel filter ECU Fuel high pressure pump Priming pump ECU cooler Primary fuel filter Fuel tank Water separater z The fuel is stored under pressure in the common rail ready for injection.
The injected fuel quantity is defined by the driver, and the start of injection and injection pressure are calculated by the ECU on the basis of the stored map. The ECU then triggers the solenoid valves that the injector at each engine cylinder injects accordingly. DL06 Diesel Engine Disassembly and Reassembly of Major Components 120