fuel in the pumping-element chamber to escape, it can now be compressed beyond the delivery pressure. The increasing pressure opens the outlet valve as soon as the rail pressure is reached, and the compressed fuel enters the high pressure circuit. The pump piston continues to deliver fuel until it reaches TDC, after which the pressure collapses so that the outlet valve closes. The fuel remaining in the pumping-element chamber relaxes and the pump piston moves downwards again. As soon as the pressure in the pumping-element chamber drops below the presupply pump pressure, the inlet valve opens and the pumping process starts again.
4) Fuel delivery rate Since the high-pressure pump is designed for large delivery quantities, excess high-pressure fuel is delivered during idle and part load operation. This excess fuel is returned to the tank via the pressure control valve. 5) Fuel metering shut off valve When one of the pumping elements is switched off, this leads Fuel metering shut off switch to a reduction of the amount of fuel which is pumped into the common rail. Switch off involves the suction valve remaining open permanently. When the solenoid valve of the Fuel high pressure pump pumping-element switch off is triggered, a pin attached to its armature continually holds the inlet valve open.
The result is that the fuel drawn into this pumping element cannot be compressed during the delivery stroke. No pressure is generated in the element chamber since the fuel flows back into the low-pressure passage again. With one of its pumping elements switched off when less power is needed, the high-pressure pump no longer delivers the fuel continuously but rather with brief interruptions in delivery. 6) Common rail The common rail stores the fuel at high pressure. At the same time, the pressure oscillations which are generated due to the high pressure pump delivery and the injection of fuel are damped by the rail volume.
After the injector use the fuel from the common rail for fuel injection, the pressure oscillation of the common rail is maintained constantly by the common rail volume. The fuel pressure is calculated DL06 Diesel Engine Disassembly and Reassembly of Major Components 126