Doosan DL06 — Doosan DL06 User Manual

Nozzle & needle z This indirect control of the nozzle needle using a hydraulic force-amplification system is applied because the forces which are necessary for opening the needle very quickly cannot be directly generated by the solenoid valve. The so-called control quantity needed for opening the nozzle needle is in addition to the fuel quantity which is actually injected, and it is led back to the fuel-return line via the control chamber's orifices. In addition to the control quantity, fuel is also lost at the nozzle-needle and valve plunger guides.

These control and leak-off fuel quantities are returned to the fuel tank via the fuel return and the collector line to which overflow valve, high pressure pump, and pressure control valve are also connected. 1) Method of operation The injector's operation can be subdivided into four operating states with the engine running and the high pressure pump generating pressure. - Injector closed (with high pressure applied) - Injector opens (start of injection) - Injector opened fully, and These operating states result from the distribution of the forces applied to the - Injector closes (end of injection) injector's components.

With the engine at standstill and no pressure in the rail, the nozzle spring closes the injector. DL06 Diesel Engine Disassembly and Reassembly of Major Components 129