Doosan DL06 — Doosan DL06 User Manual

5.4.3. Cleaning air cleaner elements z By compressed air (wear goggles) - For the purpose, the air gun should be fitted with a nozzle extension which is bent 90 ° at the discharge end and which is long enough to reach down inside to the bottom of the element. - Moving the air gun up and down, blow out the element from the inside (maximum 5 bar) until no more dust comes out of the air cleaner pleats z By washing - Before washing, the element should be precleaned by means of compressed air, as described above.

- Then allow the element to soak in lukewarm washing solvent for 10 minutes, and then move it to and fro in the solvent for about 5 minutes - Rinse thoroughly in clean water, shake out and allow drying at room temperature. The cartridge must be dry before it is reinstalled. - Never use steam sprayers, petrol (gasoline), alkalis or hot liquids etc. to clean the air cleaner elements. DL06 Diesel Engine Maintenance of Major Components 186