DL06 Diesel Engine Special Tool List 199 Group Part Inspection item Stand value for assembly Limit for use Correction Remark Con-rod bearing cap bolt (kg.m) 9.75+0.25 - Coat the bolt with engine oil Clean out foreign objects on joining surface.
Cam shaft Inner diameter of hall of cylinder block camshaft φ56.000 ~ φ56.030 - Diameter of camshaft journal φ55.92~φ55.95 φ55.65 Clearance between cam shaft and cam bush 0.03 ~ 0.09 0.18 Replace cam bush End play of camshaft 0.280 ~ 0.430 0.5 Replace thrust washer Run-out of camshaft 0.05 0.15 Correct or replace the cam shaft Timing gear Clearance between idle shaft bush and idle shaft 0.025~0.066 0.1 End play of idle gear shaft 0.107~0.183 0.3 Correct or replace gear Fly wheel Ring gear assembly part’s outer diameter φ361.5 ~ φ361.6 - Heating temperature at ring gear assembly (200~230 oC) Ring gear inner diameter φ361 ~ φ361.2 - Overlap 0.3 ~ 0.6 - Heating temperature at time of assembly (oC) 200 - Allowable shaking amount after assembly 0.5 - Outer diameter after reassembly wear ring φ99.86 ~ φ100.0 - Valve system Valve and valve guide Diameter of intake valve stem φ6.963~φ6.977 φ6.93 Replace Valve & valve guide When replacing valve guide & seat work simultaneously by special tools.
Diameter of exhaust valve stem φ6.950~φ6.964 φ6.91 Clearance between valve stem and valve guide Intake 0.023~0.052 0.1 Exhaust 0.036~0.065 0.15 Degree of valve seat Intake 60˚ - Exhaust 45˚ - Diameter of valve head Intake φ34.9 ~φ35.1 - Exhaust φ30.9 ~ φ31.1 - Thickness of valve head Intake 3.3~3.7 2.8 or more Exhaust 3.3~3.7 3.3~3.7 Projection amount of valve guide and valve spring seat Intake 12.8 ~13.2 - Use with assembly jig To upper side of valve guide from spring seat side of cylinder head Exhaust 12.8 ~13.2 - Valve seat assembly part’s inner diameter of cylinder head Intake φ35.800~φ35.8 - 25 Exhaust φ32.000~φ32.0 25