Doosan DL06 — Doosan DL06 User Manual

2) Rocker arm z Visual check Visually check the face of the rocker arm in contact with the valve stem end for scores and step wear. If the wear is small, correct it with an oil stone or grinding paper of fine grain size. Rocker arm with a considerable amount of step wear should be replaced. z Rocker arm bushing diameter Measure the inside diameter of the rocker arm bushing with an inside micrometer or vernier calipers, and compare the measured values with the rocker arm shaft diameter. If the clearance exceeds the limit, replace either bushing or shaft, whichever worn more.

DL06 Diesel Engine Disassembly and Reassembly of Major Components 78 Standard Limit φ24.991 ∼ φ25.012 mm φ25.04 mm Rocker arm and shaft clearance Standard Limit 0.031~0.073 mm 0.14 mm or less