3.2.6. Piston assembly (1) Disassembly of piston assembly Disassemble piston according to the disassembly process. (2) Piston inspection 1) Visual check z Visually check the pistons for cracks, scuff or wear, paying particular attention to the ring groove. 2) Clearance between the piston and cylinder liner z With an outside micrometer, measure the piston outside diameter at a point 12 mm away from the lower end of piston skirt in a direction at a right angle to the piston pin hole. 12 mm z Using a cylinder bore gauge, measure the cylinder liner inside 2 diameter at 3 points (cylinder top ring contacting face, middle, and oil ring contacting face on BDC) in a direction at an angle of 45 ° .
Take the mean value with the largest and smallest values excepted. DL06 Diesel Engine Disassembly and Reassembly of Major Components 88 Standard φ99.93 ∼ φ99.952 mm