z z Connecting rod bearing crush Install the bearing and cap in the connecting rod big end, retighten the bolts to specified torque, unscrew out one bolt completely, then measure the clearance between the bearing cap and connecting rod big end using a feeler gauge. 5) Crank shaft end play z Assemble the crankshaft to the cylinder block. z With a dial gauge, measure crankshaft end play. DL06 Diesel Engine Disassembly and Reassembly of Major Components 87 Crankshaft bearing crush Install the bearing and cap in the cylinder block, retighten the bolts to specified torque, unscrew out one bolt completely, then measure the clearance between the bearing cap and cylinder block using a feeler gauge.
Standard 0.065 ∼ 0.105 mm Standard 0.065 ∼ 0.105 mm Standard 0.085 ∼ 0.125 mm Standard Limit 0.14 ∼ 0.33 mm 0.4 mm