Doosan DL06 — Doosan DL06 User Manual

(3) Piston rings 1) Visual check z Replace the piston rings with new ones if detected worn or broken when the engine is overhauled. 2) Piston ring gap z Insert the piston ring into the upper portion of the cylinder liner bore so that it is held at a right angle to the cylinder liner wall. Feeler gauge z Measure the piston ring gap with a feeler gauge. z Replace piston rings with new ones if the gap is beyond the limit. 3) Piston ring side clearance z Fit the compression ring and oil ring in the piston ring groove. z With a feeler gauge, measure side clearance of each ring, and replace either the ring or piston if the measured value is beyond the specified limit.

DL06 Diesel Engine Disassembly and Reassembly of Major Components 90 Standard Limit 1st ring 0.30 ∼ 0.45 mm 1.5 mm 2nd ring 0.60 ∼ 0.80 mm 1.5 mm Oil ring 0.25 ∼ 0.45 mm 1.5 mm Standard Limit 1st ring - - 2nd ring 0. 05 ~ 0.09 mm 0.15 mm Oil ring 0.03 ~ 0.07 mm 0.15 mm