Doosan DL06 — Doosan DL06 User Manual

4) Piston ring tension With a tension tester, measure piston ring tension. Replace the piston ring if the measured value is beyond the limit. (4) Piston pin inspection Measure the amount of wear on the piston pin at the points as shown. z The measured values are beyond the limit (0.08 mm or greater), replace the piston pin. z Measure the clearance between the piston pin and connecting rod bushing, and replace either of them, whichever damaged more, if the measured value is beyond the limit. z When replacing the piston, be sure to replace the piston pin together.

DL06 Diesel Engine Disassembly and Reassembly of Major Components 91 Standard 1st ring 1.47 ~ 2.21 kg 2nd ring 1.49 ~ 2.23 kg Oil ring 4.08 ~ 5.52 kg Standard Limit φ39.994 ~ φ 40.000 mm φ 39.94 mm Standard Limit 0.006 ∼ 0.020 mm 0.08 mm