Doosan DL06 — Doosan DL06 User Manual

z Put the crankshaft gear into the heater to heat it up to 150 ° C level for 10 minutes, push it over the crankshaft by means of a jig. Crankshaft gear Crankshaft gear Apply the ULTRA BLUE #587 Crank shaft z Semi-tighten bolts at both sides of the crankshaft, apply engine oil to journals and pins, then assemble the crankshaft with the cylinder block by tightening the fixing bolts. z Coat engine oil to the pin and journal of crankshaft. z Install the oiled thrust washers with the oil groove facing outward. DL06 Diesel Engine Disassembly and Reassembly of Major Components 96