128 OPERATION 1 Unlock the hand primer pump by pushing the pump handle in and turning it counterclockwise. C0032892 2 Pump the hand primer until the force of pumping increases. C0032893 Note: When the fuel system is empty, 200 or more pump strokes may be needed to properly prime the system. 3 Lock the hand primer pump by retracting it into the housing and turning it clockwise. Note: There are NO bleed nipples to be opened in order to prime the fuel system. DANGER To avoid potential fire hazard, do not service any part of the fuel system while smoking or in the presence of flames, sparks or hot surfaces, or when working on an operating engine.
Failure to follow these precautions can result in fire. To guard against burns from direct contact with hot fuel, wear adequate protective clothing (face shield, heavy gloves and apron, etc.) when working on a hot engine. WARNING DO NOT work near the fan with the engine running. The engine fan can engage at any time without warning. Anyone near the fan when it turns on could be seriously injured. Before turning on the ignition, be sure that no one is near the fan.