Mack Trucks — Mack RH Drive Australia 21630923 Manual

50 INSTRUMENTS AND CONTROLS CAUTION Coolant temperature must NOT exceed 107°C (225°F). 3. Engine Oil Temperature Gauge (DPF) – Indicates oil temperature. 4. Exhaust Pyrometer (If Equipped) – Indicates the temperature of exhaust gases (about 12 to 16 inches from the diesel particulate filter inlet connections). This helps the operator select the proper gear for load and grade conditions, thereby avoiding excessive exhaust temperatures. CAUTION Do NOT exceed the maximum exhaust temperature indicated by the red line on the gauge. To reduce exhaust temperature, downshift or reduce engine power. If operating in cold climates with a winterfront, open the winterfront. 5.

Transmission Oil Temperature Gauge (If Equipped) – Indicates transmission oil temperature. CAUTION The maximum safe oil temperature for MACK transmissions is 121°C (250°F) for mineral-based oil, or 148°C (300°F) for synthetic oil. Continued operations with oil above this temperature will cause rapid deterioration of the oil’s lubricating properties and is NOT recommended. Consult the vendor manual for non-MACK components. 6. Aftertreament DEF Tank Level gauge (SCR) – Tells the amount of DEF fluid in the tank. 6. Coolant Temperature Gauge (DPF) – Normal operating range (77°C to 107°C; 170°F to 225°F). Once the engine reaches this temperature, it can be operated in a normal fashion.