RAM 2500/3500 — Easy Entry/Exit Seat

GETTING TO KNOW YOUR VEHICLE 37 Tilting The Seat Up Or Down CAUTION! Easy Entry/Exit Seat The angle of the seat cushion can be adjusted up or down using the power seat switch. The front of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached. Reclining The Seatback Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path. This feature provides automatic driver’s seat positioning to enhance driver mobility when entering and exiting the vehicle.

The distance the driver’s seat moves depends on where you have the driver’s seat positioned when you place the ignition in the OFF position. 2 The angle of the seatback can be adjusted forward or rearward by using the power seat switch. The seat will move in the direction of the switch. Release the switch when the desired position is reached. Power Lumbar — If Equipped When you place the ignition in the OFF position, the driver’s seat will move about 2.4 inches (60 mm) rearward if the driver’s seat position is greater than or equal to 2.7 inches (67.7 mm) forward of the rear stop. The seat will return to its previously set position when you place the ignition into the ACC or RUN position.

Vehicles equipped with power driver or passenger seats may also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support. WARNING! When you place the ignition in the OFF position, the driver’s seat will move to a position 0.3 inches (7.7 mm) forward of the rear stop if the driver’s seat position is between 0.9 inches and 2.7 inches (22.7 mm and 67.7 mm) forward of the rear stop. The seat will return to its previously set position when you place the ignition to the ACC or RUN position. Adjusting a seat while driving may be dangerous.

Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt. The Easy Entry/Exit feature is disabled when the driver’s seat position is less than 0.9 inches (22.7 mm) forward of the rear stop. At this posi- tion, there is no benefit to the driver by moving the seat for Easy Exit or Easy Entry. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.

In a collision you could slide under the seat belt, which could result in serious injury or death. Lumbar Control Switch