WHEN REQUIRED d. CLEAN RADIATOR FINS Carry out this procedure if there is any mud or dirt seen stuck to the radiator. e. CHECK AND REFILL AXLE OIL Carry out this procedure if there is any sign of oil on the axle case. Front 1. Loosen bolt (1) and remove radiator grille (2). 2. Clean the radiator fins and oil cooler fins clogged with mud, dust and leaves with compressed air. Steam or water may be used instead of compressed air. * The rubber hose should be checked at the same time. If the Remove oil level plug (I), and hose is found to have cracks or check that the oil level reaches the to be hardened by ageing, such bottom of the plug hole. If one. Further, loosened hose of plug (I 1.
hose should be replaced by new necessary, add oil through the hole clamp should also be checked. w-04321 -lll-