Komatsu — WHEN REQUIRED

WHEN REQUIRED c. CHECK AND REFILL TRANSMISSION OIL Carry out this procedure if there is any sign of oil on the transmission case, or if there is oil mixed with the cooling water. If small holes or thinner parts are found on element when it is checked with an electric bulb after cleaning and drying, replace the element. Do not use element whose folds or gasket or seal are damaged. When cleaning element, do not hit it or beat it against something. * Stop the engine when checking the oil level. 1. Use sight gauge (G) to check the oil level. * Make an oil level check before starting engine or 60 minutes or more after the engine is stopped.

If oil remains at various portions, the correct oil level cannot be measured. A When checking the oil level, apply the parking brake, and lock the front and rear frames with the safety bar and pin. 2. If the oil level is not between the top and bottom marks on the sight gauge, add engine oil through oil filler (F). * The type of lubricant used depends on the ambient tempera- ture. Select according to the table “FUEL, COOLANT AND LUBRICANTS”. - IlO- W-04320