ADJUSTMENT ADJUSTMENT PARKING BRAKE If the parking brake fails to work properly, adjust it in the following manner. 4. Restore bolt retainer (I) to the original position and confirm that the retainer is in locking position to bolt (2). A When adjusting the parking brake, be sure to put chocks on the tires so that the slippage can be prevented. Confirm that the indication of the air pressure gauge is in the green range and then release the park- ing brake. 5. There are two calipers in the parking brake, so adjust the other caliper in the same way. A Maintain the air pressure at a sufficiently high pressure to prevent the parking brake from operating automatically while adjusting the brake.
To prevent a third person from operating the parking brake by mistake, be sure to attach a caution tag to the parking brake switch. Turn bolt (2) clockwise while pressing bolt retainer (1) and let pads (3) on both sides come into close contact with disc (4). Back off bolt (2) a half turn counter-clockwise while pressing bolt retainer (1). - 118- W-04328