HANDLING OF BATTERY HANDLING OF BATTERY PRECAUTIONS FOR CHARGING BATTERY 1. Before charging, disconnect the cable from the negative (-1 terminal of the battery. Otherwise, an unusually high vol- tage will damage the alternator. 2. While charging the battery, remove all battery plugs for satis- factory ventilation. To avoid gas explosions, do not bring fire or sparks near the battery. 3. If the electrolyte temperature ex- ceeds 45”C, stop charging for a while. 6. Do not mix up cables (positive (+I to negative (-1 or negative I-1 to positive (+_)I, as it will damage the alternator. 7.
When inspecting or servicing a battery, be sure to stop the engine and turn the starting switch key to “OFF” position. 8. When performing any service to battery besides checking the electrolyte level or measuring the specific gravity, disconnect cables from the battery. 4. Turn off the charger as soon as the battery is charged. Overcharging the battery may cause followings: I) Overheating the battery 2) Decreasing the quantity of electrolyte. 3) Damaging the electrode plate. 5. If the electrolyte gets on your skin or clothes, immediately wash with plenty of clean water. - 26 - w-01307