HANDLING OF BATTERY * If the battery capacity of the After the engine has started, normal machine is smaller than the booster cables should be dis- the battery capacity of the failed connected in the reverse order in machine, use two normal which they were connected. machines. Connect the booster 1. Disconnecting the booster cables 3) Disconnect the clip of booster cable A from the positive (+I terminal of the running engine. Disconnect the other clip from the positive (+I terminal of the engine which was started. cable from one machine to the I) Disconnect the clip of booster battery on the right side of the cable B from the engine block failed machine; connect the which was started.
booster cable from the other ma- 2) Disconnect the other clip from chine to the battery on the left the negative (-1 terminal of side of the failed machine using the running engine. 4) the same procedure. When connecting the cables, never contact the positive (+I A A and negative (-1 terminals. Make sure that the booster cable connections are correct. Connect the booster cable to the engine block as far as possi- ble from the battery. 3. Starting engine 1) Turn the starting switch to START position and start up the engine. Batterv for enaine which was started 2) If the engine doesn’t start at first, try again after 2 minutes or so.
(l&&J @ (2) - Engine block which was started - 28 - ww -02053