Komatsu — 3.3.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS 2-3 - EQUIPMENT CONTROL LEVERS DANGER Before carrying out any manoeuvre with these levers, the operator must be seated in the work position with fastened safety belt; before any manoeuvre he must perform the operations described in “3.12 US- ING THE WORK EQUIPMENT”. Before leaving the operating position, lower the equipment to the ground and lock the safety device, then stop the engine. The control lever (2) is positioned at the operator’s left and con- trols the arm and the upper structure rotation, while the control le- ver (3) is positioned at the operator’s right and controls the boom and the bucket.

The following diagrams show the basic manoeuvres and the pos- sible combined manoeuvres. 2 3 RYA15610 LEVER 2 (BASIC MANOEUVRES) N - Neutral A - Arm opening B - Rotation to the right C - Arm folding D - Rotation to the left A D N B C RWA07260 LEVER 3 (BASIC MANOEUVRES) N - Neutral A - Boom lowering B - Bucket opening C - Boom lifting D - Bucket curling A D N C B RWA07270 72