INSTRUMENTS AND CONTROLS If the levers are operated in directions that are inclined with respect to the machine axis, simultaneous movements proportional to the angle of inclination are obtained, since the two hydraulic distributors corresponding to each sin- gle function are engaged at the same time.
LEVER 2 (COMBINED MANOEUVRES) N - Neutral A - Arm opening and rotation to the left B - Arm opening and rotation to the right C - Rotation to the right and arm folding D - Rotation to the left and arm folding A B N D C RWA07280 LEVER 3 (COMBINED MANOEUVRES) N - Neutral A - Boom lowering and bucket curling B - Boom lowering and bucket opening C - Bucket opening and boom lifting D - Bucket curling and boom lifting A B N D C RWA07290 73 IMPORTANT • Before rotating the upper structure, make sure that the rotation locking pin is raised (release position).
• The horn is positioned on the right lever grip and must be used to warn the persons in the vicinity at the beginning of work and in case of danger. • All movements are locked by shifting the safety device lever to the lock position (see pos. 1).