Komatsu — ADJUSTING POSTURE OF WORK EQUIPMENT

. OPERATION OPERATION ADJUST ANGLE OF BLADE EDGE WARNING POWER TILTDOZER Power tiltdozer with screw-adjustable tilt brace. Turn the brace with bar handle (1) and the distance ( l ) between the joints to change the cutting angle ( θ ) as follows. INCREASE distance ( l ) to INCREASE angle ( θ ) DECREASE distance ( l ) to DECREASE angle ( θ ). The standard for the cutting angle is 55 degrees. The standard for the distance between the joints is shown below ( l ). D65E: 1150 mm (45.3 in) D65P: 1146 mm (45.2 in) REMARK It is impossible to adjust blade angle of stable tilt brace. The standard for the cutting angle is 55 degrees.

3 - 92 (Powe r tilt dozer It is dangerous if t he work equipment moves by mistake when adjusting a ngle of th e blade edge. Set the work equi pment in stable c ondition, t hen stop the en gine and loc k the work equipment securely with the work equipm ent lock Adjust the angle (θ) of t he bla de edge to match the type of soil. ANGLE DOZER The angle of t he blade edge o f the angle dozer cannot b e adjusted The standard for the cutting a ngle is 55 degrees. The standard for the distance between t he joints is shown below ( l ). Model Standard mm (in) Use Range mm (in) D65E 1127 44.4 1117 - 1137 (44.0 - 44.8) D65P 1096 (43.2) 1086 - 1106 (42.8 - 43.6)