. OPERATION TRANSPORTATION REMARK the quick coupler, then remove the work equipment 3. Remove the left and right trunnions. (D65P) 3 - 102 PRECAUTIONS WHEN REMOVING WORK EQUIPMENT If there is any pressure r emaining i n the tilt pipi ng after th e wor k equipmen t has been removed, it m ay be difficult to remove the q uick couple r of the tilt hose, so re move the work equipment 1. Lower th the ground s If the blade is tiled, the til t piping wil l be under in terna l pressure , so set the blade horizontal to the grou 2. assembly REMARK In the cas e of D65P, remove the left and right trunnions.
se of D65E, the width including the left and right is within 3.0 m (118.2 in), so there is no need to em. I n the ca t r runnions emove th I n the cas e of D65E with 3 m semi-U blade, the blade width is within 3.0 m (118.2 in ), so there is no need t o remove the w ork equipmen t. 4. Tie the tilt hose with a band to prevent it fro m being d amaged.