Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING STARTING ENGINE WITH BOOSTER CABLE When starting the engine with a booster cable, do as follows. PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING When connecting the cables, never contact the positive (+) and negative (-) terminals. When starting the engine with a booster cable, wear safety glasses and (+) (-) 3 - 114 rubber gloves. Be careful not to let the norm each other. This prevents spa could ignite the hydrogen ga al machine and problem machine con rks from generating near the battery w s given off by the battery.

Make sure that there is no mistake in the booster cable connectio The final connection is to the engine block of the problem machine, sparks will be generated whe n this is done, so connect to a place as as possible from the battery. When disconnecting the boo ster cable, take care not to bring the c in contact with each other or with the machine body. NOTICE The starting system for this machine uses 24V. For the normal mac hine, also use a 24V battery. The size of the booster cable and clip should be suitable for the ba ttery size. The battery of the normal ma chine must be the same capacity as th at of the engine to be started Check the cables and clips f or damage or corrosion.

d clips are firmly connected. Make sure that the cables an Check that the work equipm ent lock levers and parking brake lever s of both machine are in the Check that each lever is in th e NEUTRAL position. CONNECTING THE BOOSTE R CABLE f the normal machine and probl . Keep the starting switch o machine in the OFF position Connect the booster cable a s follows, in the order of the numb marked in the diagram. 1. Connect one clip of b terminal of the problem 2. Connect the other clip o terminal of the normal m 3. Connect one clip of b terminal of the normal m 4. Connect the other clip o of the problem machine ooster cable (A) to the positive machine. f booster cable (A) to the positive achine.

ooster cable (B) to the negative achine. 4. Connect the other clip o f booster cable (B) to the engine bl .