Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING STARTING ENGINE WARNING whether the machine is working DISCONNECTING THE BOOSTER CABLE 3 - 115 Always c heck that the work e OCK position, regardless o normally or ha s failed. Check also that all the contro l levers are i n the HOLD or NEUTRAL po 1. Mak e sur e the clips are firmly connected to the battery terminals 2. Star t engine of the nor mal machine and run it at high i dle s peed. 3. Turn the starting switch of the problem mac hine to the START position and star If th e engine doesn't st art at first, try again after 2 minutes or so. After the engine has starte d, disconnect the bo oster cable s in the reverse of the order in whic h they were connec 1.

Remove one clip of boo ster cable (B) from t he engine bloc k of the problem machine. 2. Remove t he other clip o f booster cable (B) fr om the negative (-) terminal o f the normal 3. Remove one clip of b terminal o f the normal 4. Remove t he other clip o f booster cable (A) fr om the positive (+) terminal o f the problem