. MAINTENANCE GUIDE TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance to be performed. use the Komatsu genuine lubricants. Moreover use oil of the specified viscosity 4 - 2 GUIDE TO MAINTEN Do not pe rform any inspection a nd maintenance oper ation tha t is not foun KOMATSU GENUINE REPLACEMENT PARTS: Use Kom atsu genuine parts spe cified in the Parts Bo ok as replacement p KOMATSU GENUINE OILS: For lubrication of the machine, For lubric according to the ambient tempe ALWAYS USE CLEAN WASHER FLUID: Use auto mobile window washer fluid, and be careful not to let any dirt get CLEAN OIL AND GREASE:
Use clean oil and grease. Also, keep the containers o f the oil a nd grease c lean. Keep foreig n materials a way from oil and gre ase. CHECKING FOREIGN MATERIALS IN DRAINED OIL: After oil is changed or filters are r eplaced, check the old oil and fi lters for met al particles and for eign material s. If l arge quantity o f metal particles or foreign materials are found, always report to the person in charge, and carry out ction. harge, carry suitable a FUEL STR AINER: Do not re move the strainer from the filler port when a dding fue WELDING INSTRUCTIONS: witch. V continuously. hin 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near , the instruments may malfunction.
Turn of f the engine starting s Do not apply more than 200 Connec t grounding cable wit hin 1 m (3.3 instrum ents, connectors, etc. , the instruments may malfunction. If a sea l or bearing happens t o come between the p art being welded an d grounding point, change the g rounding point to avoid such parts. he work equipment pins or the hydraulic cylinders as the grounding point. Do not use the area around t he work equipment pi ns or the hydraulic c ylinders as the gro unding point DO NOT DROP THINGS INSIDE M ACHINE:
When o pening inspection win dows or the oil filler p ort of the tank to car ry out inspection, be careful no t to drop nuts, b If such lead to olts, or tools inside the machine. things are dropped ins ide the machine, it ma y cause damage an d/or malfunction of the machine , an d will failure. If you drop an ything inside the mac hine, always remove it immediately. r inspection. Do not put unnecessary thing s in your pockets. C arry only things whic h are necessary fo r inspection.