Komatsu — GUIDE TO MAINTENANCE

. MAINTENANCE GUIDE TO MAINTENANCE into the oil. 4 - 3 DUSTY WORKSITE When working at d usty worksites, do as fo Inspect the dust indicator frequently to s ee if the air c leaner is dirty or clog Clean the radiat or core frequently to av Clean and repla ce the fuel filter frequen Clean electrical components, especially the starting motor and alternator, to avoid accumulation of d When inspecting or changing the oil, mo ve the machi ne to a place that is fr ee of dust to prevent dirt fr om getting AVOID MIXING OIL S: If a different brand or grade of oil has to be added, drain t he old oil and replace all the oil with the new bran d or grade of oil. Never mix di fferent brand or grade o f oil.

PRECAUTIONS FOR OPENING AND CLOSING ENGINE SIDE COVER: Open the engine side cover all the way and ensure that it is locked open before letting go. When standing on the track to open the engine side cover, bend at the knees and open the cover in a standing position to avoid back strain. Close the engine side cover before opening or closing the cab door. Open the engin locked open bef When standing o at the knees an LOCKING THE INSPECTION COVER: Lock inspection cover securely into posit ion with the lock bar.

If inspection or maintenance is performed with Lock inspection c inspection cover n ot locked in position, the re is a dange r that it may be sudd enly blow shut by the wind and cause injury to the worke r. HYDRAULIC SYSTEM-AIR BLEEDING: After repairing or r eplacing hydraulic equip ment or after removing the hydrau lic piping, it is necessary to bleed the air from the circuit. For details, see "PROC EDURE FOR BLEEDING AIR IN H YDRAULIC SYSTEM (PA GE 4-35)". PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES When removing replace with new When doing this , be careful not to forge t to assemble the O-rings and gas When installing the hoses, do not twist them or bend them sharply.

If they are installed so, their serv ice life will be shortened ex tremely and they may b e damaged.