. MAINTENANCE SERVICE PROCEDURE NOTICE 4 - 20 REPLACING ELEME 1. Open the left en 2. Loosen bolt (2), 3. Remove the win g nut (4) and the seal washer (5), an d take out the outer elemen 4. Remove the sna take out the inne 5. To prevent dust cover the air con 6. Clean the air cle installed in Step 7. Fit a new inner e with nut (8) and replacing the outer same time. The nut (8), washer (9), snap ring (7), wing nut (4) and seal washer (5) must not be used ag ain. replace them with n ew one 8. Install the snap r 9. Set new outer el ement (6) in position, then s ecure in position with win g nut (4) and seal w 10. Remove the eva cuator valve (11), cle an with dry co mpressed air and 11.
Install the cover 12. Press the button of dust indicator (1) t o return the red piston to its original position. its original positi 13. Close the left en