Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4 - 54 3. Remov e mounting bo lts (5) for filter (4 ), then remove cove r (6). 4. Remov e the gromme t under the fend er, loosen drain plug (P), and dr ain the oil from inside the filter 5. Take o ut element (7) 6. Clean t he removed p arts and the insid e of th e case, then in stall a new element. Use Ko matsu genuin e element. 7. Fix cov er (6) with bo lt (5) by making cover with filter case 8. Install drain plug (P). 9. Loosen air vent plug when o ngine. Tighten 10. Tighte n filter cover (1 ) and then bolt ( NOTICE placing seal (3), do it after closing cover (1). When re placing seal (3), do it after closing cover ( 1).

The seal will be damage d if the filter cover closes after replacing 11. Replac e frame seal (