Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL WARNING in the damper is insufficient, the damper may be seized. Accordingly, check, and add or the rear bottom of the machine body as follows. 1) Remove two bolts (1) from the front side of the machine body. of the machine body. 3) Lower and open the cover gradually. before 4 - 62 The oil is at high tempe rature immediately after the mac hine has been operated. Wait for the oi l to cool down before starting the operation The undercover is heav y. Never try to open or close th e cover when directly beneath it.

When removing bolts(2), carry out the work from the rear of the cover so that you can easily get out of the wa I f t he quantity of the oil replace the oil accordin 1. Remove the underc er, remove two bolts (2) from t he rear side 2. Remove oil level plu g (3) and check the oil level. T he proper oil level is the bottom e Tighten plug (3). dge of the plug hole. REMARK hile the engine is stopped. Check the oil level w If the machine is in clined, set it in a level pos . checking the oil level 3. If the oil level is belo w the bottom edge of the plug h ole, remove oil filler plug (4) and Add new oil until th level plug (3). add new oil. e oil level reaches the bottom edge of oil of oil