Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 63 The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation. If there is still pressure remain ing inside the case, the oil or p lug may f ly Loosen the plug slowly to rele Refill capacity: 4 US gal) 3 US gal) D65E: (each) 24 liters (6.3 D65P: (each) 27 liters (7.1 1. Stop the machine so that d 2. Remove oil level plug (2) drain plugs (3) and (4), an 3. After draining the oil, insta 4. Add oil to the specified lev 5. Check that the oil is at t "CHECK OIL LEVEL IN (PAGE 4-47)". D65E: (each) 24 liters (6.3 D65P: (each) 27 liters (7.1 1.

Stop the machine so that d rain plug (3) is directly at the bottom. 2. Remove oil level plug (2) and oil filler plug (1), then remove d drain the oil. ll drain plugs (3) and (4). drain plugs (3) and (4), an 3. After draining the oil, insta 4. Add oil to the specified lev el through the hole in oil filler plug (1). Check that the oil is at t he specified level. For details see "CHECK OIL LEVEL IN (PAGE 4-47)". CLEAN BREATHER 1. 1. Remove top mounting bol ts (2) of filter cover (1), then use the bottom hinge as the fulcr um to open the cover to the outside.