. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING it. 5. Check the undercarriage (track, sprocket, idler, guard) for damage, wear, loose bolts, or leakage of oil from rollers. If any problem is found, repair it. 6. Check for problems in handrails, steps, loose bolts. If any problem is found, repair it. Tighten any loose bolts. 3 - 43 WALK-AROUND CHE CK Before starting the engin e, walk around the machine and look at the underside of chassis for any thing unusual l ike loose bolts and nuts, lea hydraulic system. kage of fuel, oil and coolant. Also check the condition of the work equipment and the g, play, and collection of dust at places that reach high temperature.
quipment the Also check for loose wirin g, play, and collection of dust at plac es that reach hig Leakage of oil or fuel, or accumulation of flammable material arou nd high temperatu re part s, such as th e engine muffle r or turbocharger, may cause Check carefully, and if an fire. y abnormality is found, repair it or contact your Komatsu distributor. y abnormality is found, repair it or contac t your Komatsu dis tributo Do not get on or off the m achine from the rear. Using this position is dangerous because it i s easy to slip and you cannot be seen from the operator's compartment. Always use the handrail an d step at the side when g etting on or off the machine.
If the machine is at an an gle, reposition it level before checkin Perform the following ins pections and cleaning every day befo re starting engin e for t he day's w 1. Check for damage, w ear, play in work equipment, cylinder s, linkage, and h oses. Check that there are any problem is found no cracks, excessive wear, or play in the work equipment, c ylinders, lin kage, or hoses . If , repair it. 2. Remove dirt and deb ris from around the engine, battery, a nd radiator. Check for dirt accumu etc.) around the batt flammable materials lated around the engine and radiator.
Also check for fla mmab le material (dry leaves, twigs, ery, engine muffler, turbocharger, or other high temperature engine parts. If any dirt or are found, remove them. dirt 3. Check for coolant an from the engine and coolant leaks fro m the cooling sys tem. I f any proble m is found, repair 4. Check for oil leakage of oil from power train case, final driv e case, hydrauli c tank , hoses, an Check that there is n Check for leakage of o oil leakage. If any problem is found, repair the place wher e the oil is l oil from the undercover. Check the g round for traces of oil l eakage. 7.
Check for damage to gauges, lamps on instrument panel, loose bolts Check that there is no off any dirt on the sur damage to the panel, gauges and lam ps. If any proble m is fo und, replac e the parts. Clean face.