. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING 1. Open the engine side cover on the right side of the chassis, and check that the coolant is between the FULL and LOW marks on sub-tank (1). If the water level is low, add coolant to the FULL level through the water filler port in sub-tank (1). 2. After adding coolant, tighten the cap securely. 3. If the sub-tank is empty, check for leakage of coolant, then add it to the radiator and sub-tank. 4. After adding coolant, close the engine side cover. 3 - 44 8. Seat belt and mounting clam the seat belt and mounting clamps. If t here is any damage, r eplace with new parts.
CHECK BEFORE STARTING Always check the items in this s ection before starting the engine each Do not open the radiator cap unles s necessary. When checking the coolant, always wait for the engin e to cool down and check the sub tank. Immediately after the engine is st opped, the coolant is at a high temperature and the radiator is und er high internal pressure. If the cap is removed to check the coolant level in this condition, there is a hazard of burns. Wait f or the temperature to go down, then turn the cap slowly to release the pressure and remove it carefully. REMARK In summer, the coolant may overf This is no problem. It occurs bec added.