. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING the engine is stopped and may cause serious burns. Wait for the oil 3 - 49 Parts temperature to go down before performing thi s operation 1. Open the engine side cover on the le ft side of t he chassis. 2. Remove dipstick (G) and wipe the oi l off with a 3. Fully insert dipsti ck (G) into filler pipe , then rem 4. The oil level shou ld be between the H and L ma rks on dipstick ( I ( G). f the oil level is b elow the L mark, ad d oil throu gh oil filler port F). 5. I f the oil is above the H mark, drain th e excess engine oil from drain plug (P), an d check the oil leve l again. 6.
I f the oil level is c close the engine REMARK If the machine is checking. at an angle, reposition it to level before If When checking th e oil level after the e ngine has been operated, allow the engine t o cool for 15 minute s before c hecking.