. OPERATION OPERATION CHECK OIL LEVEL IN POWER TRAIN CASE, ADD OIL WARNING CHECK BRAKE PEDAL TRAVEL WARNING 3 - 50 The parts and oil are at high temperature after the engine i s stopped, and may cause serious burns. W ait for the temperature to go down before starting the Open cover on the ri ght side of the machine. cloth. ve it. Remove dipstick (G) , and wipe the oil off with a Fully insert dipstick ( G) into filler pipe, then remo The oil level should b e between the H and L mar ks on dipstick (G). If the oil level is belo w the L mark, add oil throug h oil filler port (F). If the oil is above the H mark, drain the excess e ngine oil from drain plug (P), and c heck the oil level again.
If the oil level is corre ct, insert dipstick (G) fully int o the dipstick guide again. REMARK If the machine is at checking. an angle, reposition it to level before When checking the oil level after the engine has be en operated, allow the engine to co ol for 15 minutes before ch ecking. If th e brake pedal stroke is n ot 70 to 90 mm (2.8 to 3.5 in) (be low 70 mm or over 90 mm), the brake and st eering force is too strong or i nsufficient. If the stroke is 91 mm (3.6 in) or longer, adju st it. Depress the brake p edal all the way until it stops . The distance of trave l at the center of the pedal should be 70 to 90 mm (2.8 to 3.5 in).
When this value exc eeds 91 mm (3.6 in), or the brake fails to work, please contact your Komatsu distributor fo r adjustment.