3.1.18. Fuel injection pump Remove the oil supply pipe and return pipe connected to the fuel injection pump. Unscrew the bolts connecting the coupling and drive shaft, loosen the injection pump attaching bolts, then disassemble the injection pump. NOTE : Place the No.1 cylinder in ‘OT’ in exact EAMD021I position to disassemble the injection pump. Release the pump fixing bracket bolts to disassemble the bracket from the cylinder block. NOTE : Do not interchange the shims as they must be installed in their original positions at reassembly 3.1.19. Oil filter Using a filter remover wrench, EAMD022I remove the oil filter cartridge. Remove the pipe connected to the oil cooler.
Loosen the oil filter fixing bolts and disassemble the oil filter head from the cylinder block. 3.1.20. Vibration damper Unscrew the pulley fixing bolts and disassemble the pulley-vibration damper assembly. Unscrew the vibration damper fixing bolts and disassemble the damper from the pulley. - 53 - DISASSEMBLY