3.1.21. Timing gear case cover Disassemble the oil seal using an oil seal removing jig. Remove the cover fixing bolts and disassemble the cover from the tim- ing gear case. EAMD025I 3.1.22. Idle gear Unscrew the idle gear fixing bolts and disassemble the thrust washer and idle gear. Disassemble the idle gear pin using a rubber hammer to prevent damage to them. 3.1.23. Fuel injection pump drive Remove the dowel pin for the steering pump. Unscrew the injection pump drive shaft bearing housing fixing bolts and remove the injection pump drive assembly in which the shaft, gear, bearings, and housing are put togeth- er. EAMD027I 3.1.24.
Cylinder head cover Unscrew the cover fixing bolts and disassemble the cover. Keep the bolts in an assembly state so that the gaskets and washers may not be lost, and keep the cover gasket as assembled with the cover. EAMD028I - 54 - DISASSEMBLY